CONTROL & AUTOMATION - AX-KPC

SPECIFICATIONS

DESCRIPTION

DOWNLOADS

•2.8” LCD touch panel

- Contrast ratio = 500:1

- Viewing angle =160° (H & V)

- 240 (RGB) x 320 Dot 64K Colours.

•Memory: 8Mbytes Flash for GUI and IR commands.

•IR learning of both Modulated and Pulse IR codes. Modulation. frequencies up to 500 KHz.

•Range of Skins available for graphical user interface (GUI)

•White & Black cover plates supplied for both European and Australasian / USA styles.

Controller/Router

Flexible Installations

 

The KPC  can be powered either by PoE or via the legacy RJ45 port. The KPC-N comes packaged with both WHITE and BLACK faceplates in the traditional full size wall plate or the EURO square finish. Both PORTRAIT and LANDSCAPE installations are supported.

Full 2way Compatibility

 

Connect directly to the Axium AX-800DAV or the AX-400DA for full 2way communication out of the box. The KPC-N now offers direct control of IP devices. Some of the Axium 2way applets will also fully function without the need for any additional Axium hardware. One way control of IP devices is available including sending TCP and JPLink commands as found on may Projectors and Commercial Displays. Adding either an R1D or R4D controller provides feedback from a variety of 3rd party devices via IP or RS232. Of course there is also one way control of just about any device you can think of.

 

Not Just For Axium

 

The KPC-N is also flexible enough to be used as a standalone keypad controlling an endless amount of IR and IP controllable equipment. Consider using one as a zone 2 controller on your next job or a standalone controller for a boardroom or classroom!

CONTROL & AUTOMATION - AX-KPC
CONTROL & AUTOMATION - AX-KPC
CONTROL & AUTOMATION - AX-KPC
CONTROL & AUTOMATION - AX-KPC
CONTROL & AUTOMATION - AX-KPC
CONTROL & AUTOMATION - AX-KPC
CONTROL & AUTOMATION - AX-KPC
CONTROL & AUTOMATION - AX-KPC