FIT SERIES - FIT800FL

SPECIFICATIONS

DESCRIPTION

DOWNLOADS

Driver

8” MetaPlex™ Composite Cone with Butyl Rubber Surround

 

Driver Pivoting Angle

50°

 

Tweeter

Diffractionless 1” (25mm) Pivoting, Silk Dome Dome Tweeter, Ferrofluid Cooled

 

Tweeter Pivoting Angle

36°

 

Crossover

Gold Press Terminals

 

Frequency Response

40Hz - 20kHz

 

Impedance

8 Ohms dFIxed Crossover

 

Power Handling

5 - 125 Watts

 

SPL

89.5dB 1W/1m

 

Diameter X Depth

11 1/2” (292 mm) x 7 3/16” (182mm)

 

Retrofit Cutout Diameter

10 7/16” (265mm)

 

FastLoc Grille Diameter

11 13/16" (300mm)

 

Bracket Type

NC8FITCBi

8” 2-Way, In-Ceiling, Coaxial, Infinite Baffle Loudspeaker w/FastLoc™ Grille

 

The easy to install FIT800FL is a full-range ceiling loudspeaker with Focused Image Technology™. It incorporates the MetaPlex woofer with a butyl rubber surround and the diffraction-less silk dome pivoting Ferrofluid cooled tweeter.

 

The FastLoc™ grille patent no. 8,422,722, is a feature found only at Current Audio. Our design has allowed for the smallest exposed plastic bezel in the industry, truly making it disappear into the mounting surface. The FastLoc™ grille's unique patent pending mechanism allows for a quick installation and removal of the grille while securely fastening it in place to all types of mounting surfaces. Due to the unique design the grille will conform to uneven surfaces including popcorn, heavy textured and uneven ceilings. While our competitors have chosen to utilize magnets in their

designs thus requiring the use of a steel grille that will rust our design allows us to use corrosion and rust resistant aluminum.

 

The FIT series speakers additionally incorporate the unique Patent Pending Three Dimensional Positioning (3-DP) woofer. This design allows the user to separately adjust the angle, tilt and rotation of the woofer so you can direct the sound where you want it, not where you install it.

 

The Positive Position Lock system (PPL) uses two screws on either side of the woofer that pull the back plane tight and locks the position in place.

 

The Infinite Baffle design makes it the ideal choice for typical applications in open beam attic or enclosed ceilings.

 

Driver Material: MetaPlex™

• This is an electronically bonded substrate on a copolymer cone. Basically it is a trilaminate cone, the first layer is a copolymer base material. The second layer is a material that allows the third layer (green colored surface) to bond to the copolymer.

 

• Copolymer cones alone are found in other speakers. The key to our material is that the green coating allows for a well damped material (the first layer) to combine with a low mass high stiffness coating (the green layer). This improves the performance by stiffening a cone material that is normally used alone in entry level speakers. Better midrange performance and less bass distortion is the result from less cone breakup.

Tweeter Material: Silk Dome Tweeter

 

• Our silk dome tweeters use a treated silk soft dome. This material is neutral sounding and is used in many higher end bookshelf and cabinet speakers.

FIT SERIES - FIT800FL
FIT SERIES - FIT800FL
FIT SERIES - FIT800FL
FIT SERIES - FIT800FL
FIT SERIES - FIT800FL
FIT SERIES - FIT800FL
FIT SERIES - FIT800FL
FIT SERIES - FIT800FL
FIT SERIES - FIT800FL